Not much goes into a deck that doesn’t first land on a
miter-saw stand to be cut, trimmed, drilled, ripped, or shot; most
builders would agree that a deck would be a lot harder to build
without one. But of the herd of stands on the market, which ones
best serve deck builders? To answer that question, we tried out
seven models. Although all had desirable features, three were
standouts that we would recommend without reservation for
professional deck builders.
The ultimate work horse is the Lee Unlimited Power Bench. We were
blown away by its strength, versatility, and ergonomics. If you
have the budget to pay for it, this stand won’t disappoint
Another good bet for deck builders is the Saw Helper Ultrafence
U1010S from Sawtooth Specialty Tools. It provides sturdy,
continuous support 8 feet out from the saw, and its stop system
allows repeatable cuts over a range of more than 9 feet.
Finally, the best value is the Trojan TWC-35 Miter-Saw Stand. Its
versatility, ergonomics, and strength meet a deck builder’s
needs, and it’s easy to store, transport, and set up. For our
current budget, and because we like its small storage size, the
TWC-35 is our work horse of choice.
What We Considered
We focused on the following five criteria:
Strength. Because we commonly toss 60-pound 4x8
pressure-treated beams onto a miter-saw stand, it had better be
able to handle heavy materials.
Mobility. A stand that’s easy to relocate is a must.
After as few as three days — and rarely after more than three
weeks — deck builders move to greener pastures. Also, leaving
a stand in a backyard overnight isn’t always advisable, which
means daily set up and take down can be necessary regardless of how
long we’re in one location. The less time that takes, the
Ergonomics. The right height for a saw is different for
each person, so being able to adjust the height of the stand is a
Value. What do you get for your money?
Storage. Space in the truck can be at a premium. Some
stands fit behind the seat, but others occupy a significant portion
of the bed.
T4B Gravity-Rise Wheeled Miter-Saw Stand
Storage size: 48 inches by 27.5 inches by 27
Street price: $328
Bosch Power Tools
Shipped unassembled, the Bosch took us about an hour to put
together. Once assembled, though, the T4B was by far the easiest of
the seven stands to set up on a job site. First we wheeled it on
its pneumatic tires to where we wanted it — with the saw
fastened to it. Then we just pushed the release lever, tilted the
stand, pulled down on the handle until it locked, and tightened one
cam-lock — and it was ready for work. Extension arms slide
out to make an 8-foot-6-inch-long work table and slide in to
support short stock. The workpiece supports are flat
galvanized-steel plate, and a stop at the end of the arms lifts up
for repetitive cuts.
The ability to raise the stand with the saw in place is a great
time-saver: You never need to take the saw off the stand, whether
to store, transport, or use it. Rubber feet on the saw mount let
you set your saw on any surface.
You can store your miter saw on the Bosch T4B stand. When
you’re ready to work, roll the stand into place and loosen
the locking mechanism, and the stand pretty much sets itself
The Bosch is well-built with a wide base that gives it a stable
feel. However, the wide base also means that it takes up the most
storage space of all the stands we looked at. This stand has a
couple of other downsides too: It has no height adjustment and its
extension arms literally fall short for the long, heavy materials
deck builders use. It would be my first choice for a job where I
used lighter-weight materials and needed to set up often —
but not for building decks.
Weight: 37.5 pounds
Storage size: 73 inches by 8 inches by 11
Street price: $220
DeWalt Industrial Tool Co.
The sleek-looking DeWalt DW723 was easy to assemble out of the box;
all we needed to do was slip the workpiece support arms onto the
extension tube, tighten the wing nuts, and mount the saw. Two
quick-release clamps bolt to the saw for attaching the saw to the
It sets up fast too. Its legs fold out and lock automatically when
you push a button lock, and the outrigger tubes extend to provide a
12-foot-5-inch-long cutting platform. The workpiece support arms
are zinc-plated steel; you can buy additional support arms and
install them on the rail to support shorter stock. Unfortunately,
they measure only 2 inches by 7 inches, which we found to be too
small for deck work. A stop gauge swings up for repetitive cuts at
the end of the outrigger arms.
When folded, the DeWalt DW723 stand requires very little storage
The DW723 can support up to 400 pounds, according to the
manufacturer, though it would sink on soft ground. The clamps that
hold the saw to the rail have feet, so the saw can be used on any
When the work is done, you just push the button locks to fold the
legs in tight to the aluminum rail, making the stand easy to
transport and store. Plus, a handle lets you carry it with one
The DeWalt would make a great trim stand, but it’s not a good
choice for deck builders. Not only are the support arms too small,
but when we tried to square the end of a 12-foot pressure-treated
2x8, the extension arms sagged to the point that the cut
wasn’t square. Clearly, the stand wouldn’t be able to
manage the 16-foot and 20-foot stock we often work with. Another
drawback is the lack of an adjustment to level the stand on rough
sites or to set it to your best working height.
Weight: 129 pounds
Storage size: 57 inches by 24 inches by 13
Street price: $700
The Power Bench comes fully assembled. Designed by a contractor who
couldn’t find a work stand that suited him, and manufactured
in South Dakota, this stand will take anything you can throw at
Set up is a little more difficult than with other stands. The Power
Bench rolls in on wheels but has to be flipped over to be set up.
The table unfolds with a scissors mechanism and the wings fold out.
The legs store on top of the table and rotate 270 degrees to their
The most heavy-duty stand in this survey, the folded Power Bench
from Lee Unlimited has a dolly plate useful for carting other
The stand provides a 20-inch-by-9-foot-2-inch working surface; with
the included extension, it can reach 14 feet. It’s built with
1-inch tubing, and its height is flexible between 28 inches and 38
inches with five intermediate settings. Individually adjusting legs
allow it to be set up on uneven ground — in fact, it’s
the only stand we tested that can be set up level on sloping
Optional rollers can be added to the Power Bench and the
extensions, making it easy to roll even a 4x12 20-footer right to
the mark to be cut. Also, it can be converted into a table-saw
stand, and a dolly plate lets the stand be used as a hand truck
when it’s folded up. This is not just a stand; it’s a
work center that can be set up to support other tools — such
as a drill press, for example, which would be outstanding for
precisely drilling railings.
Weight: 92.5 pounds
Storage size: 60 inches by 27 inches by 20
Street price: $170
Ridgid Professional Tools
The AC 9941 took about 40 minutes to assemble. It can stand upright
with the saw attached for ease of storage, and it has the biggest
wheels of the group, making it easy to roll over rough terrain and
even up stairs.
Setup isn’t as straightforward as might be hoped. The
operator first opens up the legs at one end of the stand and sets
them down, then goes to the other end and lowers the wheeled legs.
There’s a locking knob on each leg, but though they do the
same thing, one is orange and one is gray. First-time users may
find this confusing, as it would seem they should perform different
functions. It takes considerable force to unfold and fold the legs
— so much so that we feared breaking the mechanism the first
time we closed up the stand. The stand’s height is not
Two quick-release clamps bolted to the saw attach it to the rail;
the clamps have feet that allow you to use the saw on any flat
surface. The outrigger tubes extend to provide a 9-foot-10-inch
cutting platform. Once assembled, the 12-inch-wide chrome-plated
workpiece support rollers stay put and need no adjustment.
Ridgid’s AC 9941 stand rolls on the largest diameter wheels
of any in this survey, great for negotiating stairs and rough
Support legs on the ends keep the extension tubes from flexing
under a heavy load. To extract the legs, press a button at the end
of the tube. For storage, the legs tuck up inside the tubes.
The authors thought the AC 9941’s feed rollers were
outstanding but questioned the durability of the C-channel in the
lower part of the support legs.
A couple of this stand’s features are noteworthy: We are very
fond of rollers, so appreciate those, and we like the wide rail
because it provides plenty of space to put tools. But the pluses
don’t outweigh the difficulty of setting the stand up. And
although we had no problems with the lower sections of the legs, we
question their durability on rough job sites and under heavy loads
because they’re made from a sheet-metal C-channel.
Weight: 84 pounds
Storage size: Three pieces; the table is 27 inches
by 39 inches by the saw height, the stand folds to 38 inches by 27
inches by 9 inches, and the legs fold to 5 inches by 9 inches by
Street price: $575
Sawtooth Specialty Tools
The initial assembly of the Saw Helper took us a bit over an hour
and a half. The process requires attaching a coupler bracket to the
saw, and a coupling plate to the extruded-aluminum wings. (The
bracket and plate get joined together when the stand is set up on
the job.) You also have to bolt the saw to a tabletop, and bolt
brackets to the wings for attaching the legs. For some saws, you
need to drill bolt holes in the saw base for the coupler
Setting up the stand and saw on the job site proceeds smoothly:
Open the stand and nest the saw and table in it. Place the legs in
their brackets and the wings on the coupling plate pins. A few
turns of a hand wheel on each side lock the 100-inch-long wings to
the saw, providing an overall length of 18 feet 8 inches. The legs
scissor open, with two feet under each leg. The leg height adjusts,
allowing for side to side (but not front to back) leveling on
uneven ground, and the saw table is a comfortable 34 inches
At the end of the day, the Saw Helper Ultrafence breaks down to
four easy-to-carry parts: the table legs, the tabletop —
which is easily removed from the legs — and two aluminum
wings whose adjustable legs lock flat for transport.
The Saw Helper’s flip-down stop combined with an
applied measuring tape speeds cuts and allows
The Saw Helper Ultrafence is the only stand I reviewed that had a
continuous fence and table. Having a fence to push material against
is a great help when aligning a square cut on a 20-foot piece of
decking, rather than relying on only the short fence of the miter
saw. The other big advantage of the Saw Helper’s continuous
fence results from a combination of a strong flip-down stop and a
measuring tape that you set up on the fence and calibrate to your
saw. Once you’ve done the setup, there’s no need to
pull out your tape and pencil for every cut. Just slide the
adjustable flipstop to the desired measurement and cut; any cut
short of 9 feet 4 inches can be repeated. The stop never moved
during our trials, yet just a push of its locking lever allows it
to slide easily to the next measurement. We were also impressed
with this stand’s strength.
Weight: 63.5 pounds
Storage size: 44 inches by 24 inches by 12
Street price: $345
The MS-2008-WB is made in Oregon from powder-coated, welded steel
tubing. It came mostly assembled; we only needed to attach the wide
Setup requires manipulating a double-jointed locking bar
that’s a potential pinch point, and tightening several thumb
screws. Its height isn’t adjustable. Once set up, its
24-inch-by-40-inch plywood table is great for bigger miter saws and
is big enough to lay tools on. It sports rollers at either end of
the saw table. The extensions measure 24 inches by 70 inches, and
the overall size is a full 13 feet. It folds up, but needs to be
stored lying flat — which takes up considerable space —
or somehow propped up on edge or end.
Although it folds into a relatively small package, the
MS-2008-WB provides a generously sized table for the saw and a full
13 feet of support.
The rollers enable long stock to be moved more easily to get the
cut just right. The MS-2000-WB can be used as a table-saw stand,
too, if you are tall enough. While set up, it can be moved on its
wheels. As much as we like what this stand had to offer, though, we
don’t think it’s made to take the weight that a deck
builder is likely to throw at it.
TWC-35 Miter-Saw Stand
Weight: 32 pounds, plus user-supplied center
Storage size: 36 inches by 16 inches by 3
Street price: $200
There is no initial assembly of the TWC-35, our personal first
choice for daily use. It consists of two folding legs that clamp to
the bottom of any length of two-by material, which acts as a center
beam. A 16-inch-by-24-inch saw platform clamps to the top of the
two-by; two 10-inch support rollers also clamp to the two-by and
are easily adjusted to the height of the saw.
The TWC-35 is 35 inches tall, but the stand also comes in a 27-inch
version. I prefer the taller one (I’m 6 feet 3 inches tall).
Because the center beam can be any width of two-by, the height of
the stand can be adjusted by using, say, a 2x10 instead of a
The length of the two-by determines the length of the stand, so
that means this stand can be up to 20 feet long and support even
the heaviest lumber pieces. When the center beam is a 20-footer,
six rollers work the best, three for each side of the saw.
Combining two TWC-35s allows for two miter saws in one space, which
can save time for deck builders with crews.
Combining two TWC-35 stands creates a long and sturdy work area
capable of supporting two saws for busy crews.
It does take a few steps to set up. Spreading the legs apart clamps
them securely to the two-by; four little dog ears inside the clamp
jaws embed themselves in the wood to create an extremely strong
grip. Pushing the locking bar with your foot locks the legs into
place. Ball-bearing rollers adjust to the proper height and allow
you to tweak the material that last 1/8 inch to dial in an accurate
cut. The saw table is a little small for big sliding compound miter
saws, but it’s big enough for a 12-inch miter saw.
The three parts of the TWC-35 stand fit behind the seat of most
A C-clamp secures the saw to the table. It can be easier to move
the saw than the workpiece, so instead of bolting the saw down, we
use one clamp that we tighten just enough to allow the saw to pivot
to make a square cut.
Kim Katwijk builds decks in Olympia, Wash.,
and is a contributing editor to Professional Deck Builder. His
wife, Linda, co-authored this article.